Quick Question: Any Idea if/when it's going to be available in the official repositories (Ubuntu in my case)?We don't maintain or have any influence on the various linux repositories. They are entirely maintained by their own teams. (The could even be build with different settings than ours.
I'm a bit wary now to install it from the deb's after my fiasco during the Ubuntu-Upgrade to 18.04
Someone with problems in DBLookupComboBox, when entering the component and selecting the chosen item, when leaving the component to go to another, it erases the selection made. it just happens from version 1.8.2 in version 1.8.0 was working properly.This is a problem when a record is saved. But this occurs when alle datasets are connected to one transaction. Setting caCommitedRetaining in transaction won't work. I made a workaround to set the option [sqoKeepOpenOnCommit] in the TSQLQuery component.
Someone with problems in DBLookupComboBox, when entering the component and selecting the chosen item, when leaving the component to go to another, it erases the selection made. it just happens from version 1.8.2 in version 1.8.0 was working properly.Please post a bug report to BugTracker and attach a demo program to demonstrate the issue. There were several bug fixes in TDBCombobox and TDBLookupCombo where this could have crept in.
I thought Modal Form related to a secondary form being like a dialog, which is not the case here.
So now trying to figure out the definition of modal form.
{$WARN 5024 on : Parameter "$1" not used}
Thanks for the release.
I can't work with lazreport with 1.8.4 nor 1.8.2. I install, I mark lazreport and sqlite3 packages for install, then Lazarus compiles and links a new exe... But when I try to execute Lazarua again I get an error with the code: 0xc000007b.
I've installed it as a secondary installation. I've tried to install in two different coputers (PC, with Windows 10 x64). I've been working with Lazarus in those computers for years without problem.
It would be nice if you can guide me where can be the problem. Now I'm working with 1.8.0 version and everything is fine.
Regards!
I can't work with lazreport with 1.8.4 nor 1.8.2. I install, I mark lazreport and sqlite3 packages for install, then Lazarus compiles and links a new exe... But when I try to execute Lazarua again I get an error with the code: 0xc000007b.Aggressive antivirus? Put Lazarus folders on white-list of the antivirus.
Aggressive antivirus? Put Lazarus folders on white-list of the antivirus.It is a better idea to notify any anti-virus developers that they also need to have a footprint of FPC compiled code available. Some actually do that, when informed and demonstrated. MS is one of them (but slow).
Is it only this project or are other projects also corrupted ?
I can't work with lazreport with 1.8.4 nor 1.8.2. I install, I mark lazreport and sqlite3 packages for install, then Lazarus compiles and links a new exe... But when I try to execute Lazarua again I get an error with the code: 0xc000007b.
Try this:Many thanks, that worked.
https://forum.lazarus.freepascal.org/index.php/topic,41524
To check if the FPC is in the waiting for update using Synaptic Package Manager:You are right... it was marked as upgradeable... now it is locked. Thanks again.
01. Start Synaptic Package Manager
02. On the bottom-left panel, click Status
03. On the top-left panel, choose Installed (upgradable)
04. On the right panel, see the exclamation mark at the right of fpc
If the fpc is marked with an exclamation mark, your Lazarus will most likely stop working after you (accidentally) upgrade it. At least it happened on me twice.
I can't seem to install 1.8.4 on Ubuntu 18.04.
Maybe you can try the workaround suggested by @bylaardt. I haven't tried it but is sounds possible:Ubuntu has a version of FPC in the repository. if you update it, the new version installed becomes "fpc 3.0.4+dfsg-18ubuntu1".
https://forum.lazarus.freepascal.org/index.php/topic,41524.msg289490.html#msg289490
The fpc installation was pretty fast and I got the compiler running.Yes there is, now that you have FPC installed. Just get Lazarus from SVN and run "make".
But when I click on the lazarus deb package (lazarus-project_1.8.4-0_amd64.deb), it just vanishes without proper response. It doesn't give any errors.
Is there another way to install Lazarus?
Hint flag that pops up a when you hover the mouse over a identifier no longer contains a hyperlinkCheck if you have TurboPowerIProDsgn package installed.
..No it isn't logical. I call procedure list from editor with keyboard shortcut and I don't want switch to mouse. Mostly I press 4-5 key and enter. And almost the search takes 3 seconds.
2. If you wish to ignore the classname, just select a particular class(screenshot2). It's seems logical to me that when "Alle" is selected, it will search through every available class, including the class names.
..
No it isn't logical. I call procedure list from editor with keyboard shortcut and I don't want switch to mouse. Mostly I press 4-5 key and enter. And almost the search takes 3 seconds.OK. I'm not gonna argue with that. :) Everyone has its own preference.
Look my screenshot and explains there. Compare the query results from new and old.In my opinion the best solution is to store the last state of the button and everyone will be happy.
l.s.
A branch was made for a future series of 3.2.x FPC releases. A first release
of this branch is still months away, but the moment to test the compatibility
of your codebases with the future FPC is _NOW_!, while there is still time
to do something about it.
The svn designation of this fixes branch is branches/fixes_3_2
As a consequence, trunk will be updated to version 3.3.1, some people might have to update their scripts.
2.0 RC1I am confused.
ftp://ftp.freepascal.org/pub/lazarus/releases/Lazarus%20Windows%2032%20bits/Lazarus%202.0RC1/
ftp://ftp.freepascal.org/pub/lazarus/releases/Lazarus%20Windows%2064%20bits/Lazarus%202.0RC1/
I am confused.With FPC 3.0.4 obviously. FPC 3.2.0 will not be released for a long time. There is even no RC1 yet.
Which one is most probably to be released: Lazarus 2.0.0 with FPC 3.0.4 or FPC 3.2.0?
2.0 RC1
ftp://ftp.freepascal.org/pub/lazarus/releases/Lazarus%20Windows%2032%20bits/Lazarus%202.0RC1/
ftp://ftp.freepascal.org/pub/lazarus/releases/Lazarus%20Windows%2064%20bits/Lazarus%202.0RC1/
No. But if you really need 64bit, you can build it with the cocoa or qt4 lcl. Or wait until there is the release and i have created the package description for fink. As soon as fink is ready for Mojave, 64-bit lazarus-1.8.4 will be available.
MiSchi
I am looking for native gui control support.Do you mean using lazarus with the cocoa-lcl or using Apple's interface builder and fit your pascal code into that?
sudo dpkg -i fpc_2.6.4-140420_i386.deb
sudo dpkg -i fpc-src_2.6.4-140420_i386.deb
sudo dpkg -i libgtk2.0-dev_2.24.10-2_i386.deb
sudo dpkg -i lazarus_1.2.2-0_i386.deb
But I could not install libgtk2.0-dev for lazarus 1.2.2, >1.4.4 and deps for this package in the Knoppix 8.1 .8.2 .
sudo dpkg -i gir1.2-gtk-2.0_2.24.31-2_i386.deb
sudo dpkg -i libgtk2.0-common_2.24.31-2_all.deb
sudo dpkg -i libgtk2.0-dev_2.24.31-2_i386.deb
sudo dpkg -i fpc_3.0.2-170225_i386.deb
sudo dpkg -i fpc-src_3.0.2-170225_i386.deb
sudo dpkg -i lazarus-project_1.6.4-0_i386.deb
sudo dpkg -i gir1.2-gtk-2.0_2.24.31-2_i386.deb
sudo dpkg -i libgtk2.0-common_2.24.31-2_all.deb
sudo dpkg -i libgtk2.0-dev_2.24.31-2_i386.deb
sudo dpkg -i fpc_3.0.4-3_i386.deb
sudo dpkg -i fpc-src_3.0.4-1_i386.deb
sudo dpkg -i lazarus-project_1.8.4-0_i386.deb
, I could not compile test applicatrion with GUI.
knoppix@Microknoppix:~/Desktop/lazarus1_6_4$ sudo dpkg -i gir1.2-gtk-2.0_2.24.31-2_i386.deb
Selecting previously unselected package gir1.2-gtk-2.0.
dpkg: warning: files list file for package 'cloop-utils' missing; assuming package has no files currently installed
(Reading database ... 449909 files and directories currently installed.)
Preparing to unpack gir1.2-gtk-2.0_2.24.31-2_i386.deb ...
Unpacking gir1.2-gtk-2.0 (2.24.31-2) ...
Setting up gir1.2-gtk-2.0 (2.24.31-2) ...
knoppix@Microknoppix:~/Desktop/lazarus1_6_4$
knoppix@Microknoppix:~/Desktop/lazarus1_6_4$ sudo dpkg -i libgtk2.0-common_2.24.31-2_all.deb
dpkg: warning: files list file for package 'cloop-utils' missing; assuming package has no files currently installed
(Reading database ... 449916 files and directories currently installed.)
Preparing to unpack libgtk2.0-common_2.24.31-2_all.deb ...
Unpacking libgtk2.0-common (2.24.31-2) over (2.24.31-2) ...
Setting up libgtk2.0-common (2.24.31-2) ...
knoppix@Microknoppix:~/Desktop/lazarus1_6_4$
knoppix@Microknoppix:~/Desktop/lazarus1_6_4$ sudo dpkg -i libgtk2.0-dev_2.24.31-2_i386.deb
Selecting previously unselected package libgtk2.0-dev.
dpkg: warning: files list file for package 'cloop-utils' missing; assuming package has no files currently installed
(Reading database ... 449916 files and directories currently installed.)
Preparing to unpack libgtk2.0-dev_2.24.31-2_i386.deb ...
Unpacking libgtk2.0-dev (2.24.31-2) ...
Setting up libgtk2.0-dev (2.24.31-2) ...
Processing triggers for man-db (2.7.6.1-2) ...
knoppix@Microknoppix:~/Desktop/lazarus1_6_4$
knoppix@Microknoppix:~/Desktop/lazarus1_6_4$ sudo dpkg -i fpc_3.0.2-170225_i386.deb
Selecting previously unselected package fpc.
dpkg: warning: files list file for package 'cloop-utils' missing; assuming package has no files currently installed
(Reading database ... 450201 files and directories currently installed.)
Preparing to unpack fpc_3.0.2-170225_i386.deb ...
Unpacking fpc (3.0.2) ...
Setting up fpc (3.0.2) ...
Running on linux
Write permission in /etc.
Writing sample configuration file to /etc/fpc.cfg
Writing sample configuration file to /usr/lib/fpc/3.0.2/ide/text/fp.cfg
Writing sample configuration file to /usr/lib/fpc/3.0.2/ide/text/fp.ini
Writing sample configuration file to /etc/fppkg.cfg
Writing sample configuration file to /etc/fppkg/default
knoppix@Microknoppix:~/Desktop/lazarus1_6_4$
knoppix@Microknoppix:~/Desktop/lazarus1_6_4$ sudo dpkg -i fpc-src_3.0.2-170225_i386.deb
Selecting previously unselected package fpc-src.
dpkg: warning: files list file for package 'cloop-utils' missing; assuming package has no files currently installed
(Reading database ... 453257 files and directories currently installed.)
Preparing to unpack fpc-src_3.0.2-170225_i386.deb ...
Unpacking fpc-src (3.0.2) ...
Setting up fpc-src (3.0.2) ...
knoppix@Microknoppix:~/Desktop/lazarus1_6_4$
knoppix@Microknoppix:~/Desktop/lazarus1_6_4$ sudo dpkg -i lazarus-project_1.6.4-0_i386.deb
Selecting previously unselected package lazarus-project.
dpkg: warning: files list file for package 'cloop-utils' missing; assuming package has no files currently installed
(Reading database ... 470435 files and directories currently installed.)
Preparing to unpack lazarus-project_1.6.4-0_i386.deb ...
Unpacking lazarus-project (1.6.4) ...
Setting up lazarus-project (1.6.4) ...
Processing triggers for man-db (2.7.6.1-2) ...
Processing triggers for desktop-file-utils (0.23-2) ...
Processing triggers for gnome-menus (3.13.3-9) ...
Processing triggers for mime-support (3.60) ...
Processing triggers for shared-mime-info (1.8-1) ...
Unknown media type in type 'all/all'
Unknown media type in type 'all/allfiles'
Unknown media type in type 'all/all'
Unknown media type in type 'all/allfiles'
sudo dpkg -i gir1.2-gtk-2.0_2.24.31-2_i386.deb
sudo dpkg -i libgtk2.0-common_2.24.31-2_all.deb
sudo dpkg -i libgtk2.0-dev_2.24.31-2_i386.deb
sudo dpkg -i fpc_3.0.4-3_i386.deb
sudo dpkg -i fpc-src_3.0.4-1_i386.deb
sudo dpkg -i lazarus-project_1.8.4-0_i386.deb
How to fix problem with /usr/bin/ppc386 ?sudo dpkg -i gir1.2-gtk-2.0_2.24.31-2_i386.deb
sudo dpkg -i libgtk2.0-common_2.24.31-2_all.deb
sudo dpkg -i libgtk2.0-dev_2.24.31-2_i386.deb
sudo dpkg -i fpc_3.0.4-3_i386.deb
sudo dpkg -i fpc-src_3.0.4-1_i386.deb
sudo dpkg -i lazarus-project_1.8.4-0_i386.deb
knoppix@Microknoppix:~/Desktop/lazarus$ sudo dpkg -i lazarus-project_1.8.4-0_i386.deb
dpkg: warning: files list file for package 'cloop-utils' missing; assuming package has no files currently installed
(Reading database ... 470444 files and directories currently installed.)
Preparing to unpack lazarus-project_1.8.4-0_i386.deb ...
Unpacking lazarus-project (1.8.4) ...
Setting up lazarus-project (1.8.4) ...
Processing triggers for shared-mime-info (1.8-1) ...
Unknown media type in type 'all/all'
Unknown media type in type 'all/allfiles'
Processing triggers for desktop-file-utils (0.23-2) ...
Processing triggers for gnome-menus (3.13.3-9) ...
Processing triggers for mime-support (3.60) ...
knoppix@Microknoppix:~/Desktop/lazarus$